Hilink 12V 3W Single Output DC-DC Converter 3W 12V HLK-PM12 AC DC Converters Power Supplies
3W series
| Model NO. | Size (mm) | Weight (g) | Output Power (w) | Output Voltage (v) | Output Current (mA) | Efficiency %(TYP) |
| HLK-PM01 | 34*20*15 | 20g | 3W | 5 | 600 | 72 |
| HLK-PM03 | 3.3 | 1000 |
| HLK-PM09 | 9 | 330 |
| HLK-PM12 | 12 | 250 |
| HLK-PM24 | 24 | 125 |
PCB
3W Ultra small series PCB Board
PM03L/PM01L/PM09L/PM12L/PM15L/PM24L
Description
3W ultra-small series of power module is a small volume, high efficiency module power supply.
With the global input voltage range, low temperature rise, low power consumption, high efficiency, high reliability, high security isolation and so on.
Has been widely used in smart home,automation,communications equipment, instrumentation and other industries.
Technology
| Items | Technical Parameters | Units | Notes |
| No-load rated output voltage | 12.0±0.1 | Vdc | |
| Full-load tated output voltage | 12.0±0.2 | Vdc | |
| Short time maximum output current | ≥350 | mA | |
| Long time maximum output current | 250 | mA | |
| Voltage regulation | ±0.2 | % | |
| Load regulation | ±0.5 | % | |
| Input low voltage efficiency | Vin=115Vac, Output full load≥73 | % | |
| Input high voltage efficiency | 3Vin=230Vac, Output full load≥73 | % | |
| Output ripple and noise (mVp-p) | ≤120 Rated input voltage,output full load. With 20MHz bandwidth oscilloscope, Load side 10uF and 0.1uF capacitance test | mV | |
| Switching on/off overshoot amplitude | (Rated input voltage, output plus 10% load)≤5 | %Vo | |
| Output over-current protection | Output maximum load 110-150% | A | |
| Output short circuit protection | Direct short circuit in normal output and automatic return to nomal operation after removal of short circuit | | No-damage to the whole device |
Safety Characteristics:
1 Products designed to meet UL, CE safety certification requirements.
2 Safety and electromagnetic compatibility
Designed with the input of 0.5A UL certified insurance;
PCB board using double-sided copper clad plate production, material for the 94-V0 fire rating level;
Safety standards: Compliance with UL1012, EN60950, UL60950
Insulation voltage: I / P-O / P: 2500VAC
Insulation resistance :I / PO / P> 100M Ohms / 500VDC 25 ℃ 70% RH
Conduction and radiation :comply with EN55011, EN55022 (CISPR22)
Electrostatic discharge :IEC / EN 61000-4-2 level 4 8kV / 15kV
RF radiation Immunity: IEC / EN 61000-4-3 See Application Note
3 Temperature safety design
At room temperature,the capacitors of this power , the inner surface of the main converter maximum temperature does not exceed 90
℃;
Shell maximum surface temperature does not exceed 60 ℃
